Removing Blown-in Insulation – Quick and Easy Tutorial Guide for Beginners

How old is the insulation in your attic?

Well, it’s a fact that insulation plays a vital role to let your commercial and home property run efficiently and on possible terms. If in case your required space is not heating properly, then it’s time to think about the replacement of insulation.

Is it difficult to remove blown-in insulation on your own? Yes, it is not that simple as it sounds to be!

Here we have a quick guide for you about how to remove blown-in insulation and why you need to take professional guidance to do this job.

Why you should Remove Blown-In Insulation?

The reason why you need to replace the insulation is that you have noticed that it is not performing the right job. It is often giving rise to certain issues of mould, wildlife damage, and is ruining your attic space.

Certain animals such as raccoons, mice, opossums, and squirrels can fully invade your attic and can damage your entire insulation. Urine and faeces of animals can reduce the level of air quality and can contaminate your insulation with ticks, mites, and fleas.

Sources: nwfamn

Quick Guide on How to Remove Blown-In Insulation

Now if you have finally decided to tackle the whole process of removing old insulation, the main question is from where to start. Let’s help you a bit in it and explain to you a quick step by step guide over this project:

Step no 1: Inspect the Insulation

Insulation is divided into different types, so you need to choose the one which suits your attic requirements. Blown-in insulation is normally made out of small particles which is fibre or foam based in appearance. You can also find other blown-in insulation made from different other materials. All these particles are extremely tiny with which they can easily conform or sprayed at any space by creating a small seal.

This blown-in insulation is extremely popular in such spaces where it is not easy to install insulation by using different other methods.

Also Read: How to Install Attic Insulation Over Existing? Quick Guide, Tips, Cost & Insulation Needs

Step no 2: Collect the Right Equipment

Collect all the basic tools/equipment and organize them together before you start to remove any insulation. Don’t forget to wear protective goggles, pants, sleeves, gloves, and respirators. It is dangerous for your lungs, in case the old insulation enters inside your body.

To dispose of the old insulation, you need to arrange a wide range of garbage bags. Finally, you can set your ladder in one place and have your wet/dry or HEPA vacuum handy.

Step no 3: Protecting your Space

This step is all about protecting the space around you. You have to make sure that the openings and doors of your workspace are completely closed. It is extremely harmful if the contaminants travel through the air and settled at such a place where it can ingest into other people.

Step No 4: Set up Tarp & Trash-bags

There is also a need to set-up the disposal area first, so you don’t need to get into any sort of struggling when your arms are full of old insulation. It is extremely important to dispose of the old insulation quickly to prevent the rise of contaminants in the air.

Step no 5: Vacuum Insulation

Once you are all done with the previously explained steps, it’s time to vacuum out the insulation. You have to work fast and work your way backwards from the back of the attic. Don’t forget to empty the vacuum after a while in case if you are using your vacuum machine.

Source: Pinterest

How you can Dispose of Old Insulation?

Once you have filled the garbage bags, make sure you have squeezed them to let out any excess air before tying them. For your c convenience, you can even place each bag into a second one for creating a better seal.

After this, you need to do some basic research on disposal and recycling methods which will vary by area. You can take help from your local waste-management office and get quick guidance about what to do with the insulation of your type.

In majority conditions, you can also place the bags out with regular trash. If there is any fibreglass insulation manufacturer near your house, you can also call and ask if they have any recycling program.

Final Verdict

So this was the end of the discussion about how you can easily remove blown-in insulation with less hassle. For the starters, it might sound tricky and difficult to end, so probably hiring professional services is the best option left for all those people.

With better insulation, you will 100% experience fewer insects and will witness less pollen and dirt in your space. You will get lower utility bills, as heat and cool air will no longer be able to leak out of your poorly insulated attic.

We will be happy to hear your thoughts

Leave a reply

Attic Savvy
Enable registration in settings - general