How to Repair an Attic Ladder – DIY Tutorial Guide for Beginners

The majority of the homes are built through a convenient storage space which is either in a form of an attic or as a basement. Access to any attic space is built through an access panel door and a set of folding wooden stairs.

With time, the attic ladder might wear out around the area of steps that take the brunt of a person’s weight. Once these ladder steps become loose, it becomes essential to instantly repair it to avoid any sort of accident or further damage to your wooden ladder!


Things you will need before starting out

  • Screwdriver
  • Hammer
  • Screws
  • Saw

Do you know How to Install Attic Ladder?

Step by Step Guide on How to Repair an Attic Ladder

Step 1: Open the Main Access of Attic Panel

First of all, you have to open the main access panel of your attic. This attic access panel is connected through the folded wooden ladder. You should stand out if you feel that the ladder might get unfold abruptly as you will open the door.

Step 2: Extend the Ladder

You have to extend the ladder completely into the climbable position. Your ladder should be in the direction where it has to point at an angle ascending up into the attic.

Step 3: Locate loose steps Over Ladder

Locate all the loose steps over the ladder. You can out a slight weight of your body on the ladder steps to figure out which steps are loose and need to repair more.

Step 4: Identify all loose nails or screws

In the next step, you have to identify the nails or the screws which are keeping up a loose step in one position. You have to remove off the screws or the nails by using the claw-end of a hammer or any suitable screwdriver. Remove all the steps and inspect them carefully against any sort of splintering or cracks. If the wood is splintered or cracked, you have to instantly replace it by cutting a 2-by-4 to fit the dimensions of the ladder step.

Step 5: Screw the ladder step back

Now just screw the ladder step back on top of the ladder frame by the use of wood screws. You have to place the steps in the correct direction. Use any level to figure out whether it is flat or not. You have to screw almost 3 screws at both the sides of your frame.

Read more about our detailed guide on Best Attic Ladder Reviews

Step 6: Cutting of small Brackets over the ladder step

Cut around 2-by-4 into two small sets of brackets with such a dimension to get fitted underneath the ladder step. It should be corresponding to the dimensions of your specific ladder frame. Now screw all the brackets into one place by using wood screws on every single bracket.

Step 7: Screw the bracket of ladder step

Now just place the screw all through the top of the ladder step into the top area of your bracket. This will add extra security to your new step.


You want to replace your attic ladder by yourself but don’t know how, then you must read How to Replace Attic Ladder

How you can Easily Repair an Attic Ladder Spring

If the springs are worn, rusted, loose, or broken, the integrity of the whole system is critically compromised and instant repair is necessary. The whole process of repairing an attic ladder spring is extraordinarily simple which we are about to explain right below for you. You will just require a wrench or screwdriver and a partner.

Read some interesting reviews about best attic fans you can have in your attic.

Step 1: Climb up the attic

Climb up into the attic. The springs are most at ease when the attic ladder is in the stowed position. If the springs are in an awful shape, it may additionally be smart to use a stepladder rather than the attic ladder to climb up.

Step 2: Inspect the brackets at the door hinge

Close the attic door as soon as you and your associate are in the attic. Inspect the brackets at the door hinge the place the springs connect to the attic door frame. If they are loose, tighten them up as soon as possible by using both a wrench and screwdriver.

Step 3: Clutch Springs in the Middle

Put on your gloves and clutch one of the springs in the middle. Pull towards both ends of the spring. While pulling, let your partner use the screwdriver to gently pull the hooked cease of the spring out of the ring it is connected to. Repeat this step for the different spring if each needs replacement.

Do you have any idea about How to Measure for Attic Ladder?

Step 4: Take Substitute Spring and Hook

Take the substitute spring(s) and hook into the ring on the bracketed end. Pull the contrary end so that you are capable to hook it onto the folding metallic arm. Repeat for the different sides if necessary. Your attic ladder should be counterbalanced again, simply as if it had been new.



Before you add some screws over the new ladder step, you have to use wood glue for extra security.


Stay cautious at the time of cutting wood or even removing the nails. Wear all the necessary safety equipment such as glasses and gloves while you start performing this task.

We will be happy to hear your thoughts

Leave a reply

Attic Savvy
Enable registration in settings - general